High performance, water based oil formulated with unique HYDROGUARD technology. UltraDeck delivers an exceptionally durable, long lasting semi transparent finish that enhances the characteristics of the timber grain and weathers naturally, without risk of cracking, blistering and peeling. Low odour and fast drying.Where To Use
On all exterior timber* including decking, garage doors, garden furniture, walkways, fences and railings.*Spotted Gum has a high oil content and may continue to leach after initial weathering. So, for best results on Spotted Gum useNature’s Timber Oil.Gloss Level
Preparation is the key to long lasting, professional looking results. Click here for how to prepare the timber surface before coating.
Brush, spray or applicator.
Two coats. Three coats will be required in extreme conditions such as full sun exposure, around pools and in humid areas, and may be required on porous timbers.
Allow a minimum of 4 hours drying between coats at 25°C.
Touch Dry: 1 hour at 25°C and 50% humidity.
Decking can be walked on, with care, after 12 hours. Full curing 7 days.
10-14 square metres per litre depending on the porosity of the timber.
If necessary, sand lightly between coats to remove any raised grain.
1, 4 and 10L.Please refer to the instructions provided on the Intergrain Timber Finish container before commencing your project.